Output of EDGER, American version
=================================

entry width [in.]? 5
entry thickness (do not exceed 80% of the width) [in.]? 1
exit width [in.]? 4.5             width reduction is 10.00 %
rolling temperature (degrees Fahrenheit, 1560 to 2190)? 1900
actual exit speed [fpm]? 600
roll surface hardness (Shore C, 40 to 100)? 60

for roll material refer to the following table:
   0 (Non-graphitic steel); 0.5 (Graphitic steel);
   1 (Nodular pearlitic cast iron); 1.5 (Nodular acicular cast iron);
   2 (Nodular martensitic cast iron); 2.5 (Chilled cast iron);
   3 (IC cast iron); 3.5 (Hi-Chrome cast iron); 4 (Tungsten carbide).
roll material? 2
                                                 ERT = Equiv. Rect. Thickness
Dnom = 13    Dmin = 11.6    Dwor = 12.533        ESA = Exit Section Area
rolled stock has C = 1; Mn = 1; Cr = 1 [%]

roll pressure = 18899 psi                        ERT =  1.068 in.
roll force = 17 short tons                       ESA =  4.808 sq.in.
roll torque = 4935 ft-lb                         rotational speed = 183 rpm
rolling power = 172 HP                           forward slip = 0.999
                                                 cw = 0.302
m to return to menu, d to exit to DOS